Motorised Roller Shutters

Motorised Roller Shutters Have A CW5 Or CWR5 240 Volt Tubular Motor.

Shutters Galore CW5R 240 Volt Tubular Motor with a 50mm wired radio receiver is installed in motorised roller shutters.The CW5 and CW5R roller shutter motors are manufactured under strict manufacturing and quality control guidelines and designed to perfection.  They are renowned for their reliability, seamless operation, impressive energy efficiency and quiet performance

The CW5 and CWR5 motors are available in six different lifting capacities: 10Nm, 15Nm, 20Nm, 30Nm, 40Nm, 50Nm, and 4 operating speeds from 12rpm – 30rpm

These motors are compact and short, making them easy to work with and ideal for tight and small jobs.

They have simple limit adjustments, making them easy to program an accurate end-limit.

These motors have a thermal cut-out protection system for safety and are all backed by our 5 Year Warranty.

Motorised Roller Shutters Have A CW5 Or CWR5 240 Volt Tubular Motor.

CW5 And CWR5 240 Volt Wired Short Tubular Motor

The CW5 and CW5R roller shutter motors are manufactured under strict manufacturing and quality control guidelines and designed to perfection.  They are renowned for their reliability, seamless operation, impressive energy efficiency and quiet performance

The CW5 and CWR5 motors are available in six different lifting capacities: 10Nm, 15Nm, 20Nm, 30Nm, 40Nm, 50Nm, and 4 operating speeds from 12rpm – 30rpm

These motors are compact and short, making them easy to work with and ideal for tight and small jobs.

They have simple limit adjustments, making them easy to program an accurate end-limit.

These motors have a thermal cut-out protection system for safety and are all backed by our 5 Year Warranty.

Shutters Galore CW5R 240 Volt Tubular Motor with a 50mm wired radio receiver.

Motorised Roller Shutters Have A CW5 Or CWR5 240 Volt Tubular Motor.

The CW5 and CW5R roller shutter motors are manufactured under strict manufacturing and quality control guidelines and designed to perfection.  They are renowned for their reliability, seamless operation, impressive energy efficiency and quiet performance

The CW5 and CWR5 motors are available in six different lifting capacities: 10Nm, 15Nm, 20Nm, 30Nm, 40Nm, 50Nm, and 4 operating speeds from 12rpm – 30rpm

These motors are compact and short, making them easy to work with and ideal for tight and small jobs.

They have simple limit adjustments, making them easy to program an accurate end-limit.

These motors have a thermal cut-out protection system for safety and are all backed by our 5 Year Warranty.

Heading Box: CW5 written inside a black rectangle and a gold border on top which is slightly above the rectangle. The entire image is on a 5 degree angle with the right side pointing up.

The CW5 motor is best for people who prefer to operate their roller shutters with a wall switch.  

The receiver is built into the wall switch.  

You can also operate these roller shutters with additional remote controls for extra convenience.

Image of two arrows in a circle. One arrow is pointing to the left and the other is pointing to the right. Both of these arrows are in the gradient colours of red, purple and blue.
Heading Box: CW5R written inside a black rectangle and a gold border on top which is slightly above the rectangle. The entire image is on a 5 degree angle with the right side pointing up.

The CWR5 motor has a built-in receiver within the roller shutter tube. 

This is the latest technology and it’s best of people who only require to operate their roller shutters with a remote control.

Wall switches are not compatible with this motor.

Motor Dimensions

Shutters Galore vertical Image of a CW5R tubular motor showing the dimensions.
Motor Description
Measurements
Power Supply:
240 Volts – 50 Hz
Thermal Cut-Out:
4 Minutes
Progressive End-Limit Switch Capacity:
22 Turns
Protection Index:
IP 44
Ambient Temperature of Use:
– From -20°C to +40°C – Exceptionally From -20°C to +70°C
Power Supply Cable:
– 4 x 0.75mm² wires – 2.5 Length, White HO5 VVF
Base Diameter for Round Tube:
Ø 50 x 1.5mm
Motor Head Thickness:
20mm

Motor Dimensions

Shutters Galore vertical Image of a CW5R tubular motor showing the dimensions.
Motor Description
Measurements
Power Supply:
240 Volts – 50 Hz
Thermal Cut-Out:
4 Minutes
Progressive End-Limit Switch Capacity:
22 Turns
Protection Index:
IP 44
Ambient Temperature of Use:
– From -20°C to +40°C – Exceptionally From -20°C to +70°C
Power Supply Cable:
– 4 x 0.75mm² wires – 2.5 Length, White HO5 VVF
Base Diameter for Round Tube:
Ø 50 x 1.5mm
Motor Head Thickness:
20mm